Now that the USB Blaster is connected to the target board, connect the JTAG Probe to the host computer. Open On-Chip Debugger 0.9.0-dev-dirty (2023-07-22-18:20) Licensed under GNU GPL v2 For bug reports, read http://openocd.sourceforge.net/doc/doxygen/bugs.html Warn : Adapter driver 'usb_blaster' did not declare which transports it allows; assuming legacy JTAG-only Info : only one transport option; autoselect 'jtag' Info : No lowlevel driver configured, will try them all Info : usb blaster interface using libftdi Info : This adapter doesn't support configurable speed Info : JTAG tap: arc600.cpu tap/device found: 0x200024b1 (mfg: 0x258, part: 0x0002, ver: 0x2) Info : accepting 'telnet' connection on tcp/4444 ## Erase first page reset halt mww 16726288 1 mww 16726280 256 mww 16726284 1792…