The Banana Pi BPI-R4 Pro is a new router board based on MediaTek Filogic 880 (MT7988A) Cortex-A73 SoC offering two 10GbE SFP+ cages/RJ45 ports combos, four 2.5GbE RJ45 ports, two Gigabit Ethernet interfaces, and optional WiFi 7 support via the Banana Pi BPI-R4-MIC-BE14 dual mini PCIe module. Banana Pi BPI-R4 Pro specifications:SoC – MediaTek MT7988A (Filogic 880) quad-core Arm Corex-A73 processor @ 1.8GHz with AI-powered packet accelerator called TOPS (Tunnel Offload Processor System)System Memory – 8GB DDR4DDR4 Storage 8GB eMMC flash 256MB SPI NAND Flash MicroSD card slot 2x M.2 Key-M sockets for NVMe SSDs (see Expansion section for details)Networking 2x 10GbE SFP+ cages multiplexed with adjacent 10GbE RJ45 jacks . The Banana Pi BPI-R4 Pro board can be purchased on the BPI shop for $165. There have been complete kits on Amazon for a while, but as far as I can remember, not from Banana Pi themselves. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.